Reverse Osmosis Water Purifiers
Drinking water which one gets from
municipal supplies or ground-well are getting detoriated
and are containing lot of dissolved impurities. You
have been purifying this water through UV/Electronic
Boiling based purifiers and thinking that purified water
is purest and totally safe. Have you checked for the
Electronic Boiling based water purifiers
do not remove soluble impurities like salts,
pesticides, heavy metals and harmful chemicals which
can cause serious diseases.
Electronic Boiling based water purifiers
only deactivates bacteria and viruses and the dead ones
remain in the purified water. There are chances of getting
them re-activated on long storage/ increased temperature
The answer is clear that outdated Electronic
Boiling based water purifiers cannot cater to the presently
available drinking water from municipalities or ground
Thanks to revolutionary Water
Tech Systems R-O (Reverse Osmosis) Water
Purifiers, you can now purify tap water or even ground
well water to absolutely safe and pure, sweet and tastiest
drinking water. Watertech Systems R-O Water Purifiers
besides removing insoluble impurities also remove soluble
impurities like salts and heavy metals.
Check for the following advantages
of Water Tech Systems R-O System:
Water Tech Systems R-O Water Purifiers
remove all bacteria & viruses (Dead / Alive) because
of filtration through R-O Membrane whose pore size is
below 0.0001 micron.
Removes even soluble impurities like pesticides,
fluorides, heavy metals & undesirable salts.
Enhances taste of water & makes it sweet.
Water Tech Systems R-O Water
Reverse Osmosis is a process wherein water is forced
through a semi-permeable Membrane by applying strong
pressure, thereby allowing only fine water molecules
to pass through it. All contaminants such as
bacteria, viruses, herbicides, heavy metals and chemical
poisons are removed. With added special features,
pure water is then collected in a container and dirty
water with impurities is discharged separately.
Tech Systems R-O Water Purification
The diameter is less than 0.0001 micron
(which is 500,000 times less than the diameter of our
R-O Membrane is able to filter harmful
substances like suspended particles, viruses, bacteria,
heavy metals etc.
under pressure is passed through membrane having
pore diameter of 0.0001 micron that removes than
90% of dissolved salts and only allows required
residual minerals and pure water molecules. Purified
water is collected for use in a storage tank and
water impurities are flushed through reject port.
Reverse osmosis will not remove all contaminants
from water as dissolved gases such as dissolved
oxygen and carbon dioxide not being removed. But
reverse osmosis can be very effective at removing
other products such as trihalomethanes (THM's),
some pesticides, solvents and other volatile organic
compounds (VOC's). Reverse osmosis is a process
that industry uses to clean water, whether for
industrial process applications or to convert
brackish water, to clean up waste water or to
recover salts from industrial processes.
water supplies contain hardness minerals (calcium
& magnesium). These minerals from scale and
create problems in Hair Losses, Dishwashers, Coffee
Makers. Softner Treat Hard Water Phisio Chemical
Process Hard water passes through the resin column
which is filled with a food grade cataion softing
resin in the sodium form. This resin absorbs the
calsium & magnesium ions from the hard water
and release the sodium IONS into the water thus
softing the water. When resin has completely exhasusted
its sodium IONS. It needs to be recharged for
20 minutes with sodium salt short it is fed into
the resin clumn & magnesium INOS and is charged
with sodium IONS & finally gives soft water.
1. 3-CYCLE VALUE
Water Tech Systems uses a non corrosive single lever
six way valve that operats in three cycles: softerning,
brine draw and regeneration, and rinse. The water flow
rates during these phases are controlled by built in
flow restrictors. These valves are non corrosive and
easy to operate.
2. PRESSURE VESSELS
user non-corrosive composit and Fiber Reinforced Polyster
pressure vessels. These multi-wall light weight vessels
are capable of withstanding pressures up to 10 Bar (150
psi)and being non-corrosive
are guaranteed to give longlasting performance.
3. SOFTERNER RESINS
Uses international quality polystyrene cationic resin
suitable for softerning drinking water and water used
for food processing. The prinipal characteristic of
these resins and high exchange capacity and excellent
4. SALT STRONG TANKS
The high capacity HDPE Salt Storage tanks allow extended
periods between salt refills. These tanks are resistant
to corrosion from salt, acids and alkalis.
5. BRINE WELL
A perforated HPED tube provides direct contact between
the salt and the water to produced brine for regeneration.
6. BRINE DIRECTOR
The Brine Director injects a per-set quantity of soft
water into the brine well to form brine for the next
regeneration. The Dosing system allows the correct quantity
for brine, in proportion to the quantity of the resin
to be regenerated, to flow into the softerner on regeneration.
The Brine Director is fitted with a safety device with
a value and mechanical float to prevent any risk of
the salt storage tank overflowing.
Softeners treat hard water by a physico-chemical process.
When the valve is set on a service mode, hard water
passes through the resin coloumn which in filled with
a food grade cation softening resin in the sodium form.
The resin absorbs the calcium and magnesium ions from
the hard water and releases the sodium ions into the
water, thus softening the water. When the resin has
completely exhausted its sodium ions, it needs to be
recharged and the valve is set to the regeneration mode
for approx, 30 minutes. In the regeneration mode the
sodium salt is fed into the resin coloumn and the resin
releases the calcium and magnesium ions and is charged
with sodium ions. Then the valve is set to the rinse
mode which removes the brine remaining in the colomn
until required quality is abtained.
Softeners have numerous advantages over conventional
• Corrosion resistant FRP Pressure vessel gives
• Corrosion resistant single lever six way valve
made from engineering plastics is easy to operate.
• Fittings, pipings and accessories made from
corrosion free PVC materials for long service.
• Efficient production of soft water.
• International quality resins suitable for drinking
water systems release no substances that could alter
- Properties of treated water.
• High exchange capicity and excellent regeneration
efficiency minimises salt consumption.